开始不知道瞎折腾了什么东西，samba的广播服务没了
看看日志
vim /var/log/samba/log.nmbd # 查看日志 # 结果如下 [2024/02/04 13:58:52.041843, 0] ../../source3/nmbd/nmbd_subnetdb.c:127(make_subnet) make_subnet: Failed to open nmb bcast socket on interface 172.17.0.1 for port 137: Cannot assign requested addressifconfig # 看ip地址 # 输出 docker0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255 inet6 fe80::XXXXXXXXXXXXXXXXX prefixlen 64 scopeid 0x20<link> ether XXXXXXXXXXXXXXXXX txqueuelen 0 (Ethernet) RX packets 49 bytes 5235 (5.2 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 614 bytes 143487 (143.4 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.123.151 netmask 255.255.255.0 broadcast 192.168.123.255 inet6 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX prefixlen 64 scopeid 0x0<global> inet6 XXXXXXXXXXXXXXXXXXXXXXXX prefixlen 64 scopeid 0x20<link> ether 00:11:22:33:44:55 txqueuelen 1000 (Ethernet) RX packets 3137566 bytes 2631980879 (2.6 GB) RX errors 0 dropped 1 overruns 0 frame 0 TX packets 1860788 bytes 1459541033 (1.4 GB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 23实际上需要广播的是eth0这个网卡，去samba配置文件里面设置一下
# 去smb.conf里面配置 vim /etc/samba/smb.conf # 在[global]后面添加下面的 server min protocol = NT1 # 某些老设备只支持smb1.0，可能需要开启 netbios name = hnas # 广播的名称 interfaces = eth0 # 固定到局域网网卡 bind interfaces only = yes # 只在局域网广播这样就解决问题了，可以正常广播
欢迎投稿（技术分享、原创教程）至本站机器人: blog#mige.eu.org
Subscribe by Email
Follow Updates Articles from This Blog via Email
No Comments